Jackdaw Nest Box 2CM
€ 248.31
| Article name | Jackdaw Nest Box 2CM |
|---|---|
| Product number: | 00256/3 |
| Delivery time | Delivery in 5 months |
Registered design
Suitable Jackdaw roosts should be offered, especially where old buildings are renovated and structural changes are made. The Jackdaw, as a medium-sized Corvid, is very social and forms breeding colonies if the conditions are suitable. Based on the Jackdaw Nest Box No. 29, which has been used very successfully for more than 25 years, a more modern version has been developed especially for use on buildings.
The front panel of Jackdaw Box 2CM can be removed completely by undoing the side wing screws. Because the screws are positioned to the side, away from the entrance, it is not possible for the Jackdaws to open the box.
Nest Boxes 2TF and 2CM are fixed onto the building wall with an X-bracket made of stainless steel. To this end, the X-bracket is screwed onto the wall with 4 screws (and wall plugs if necessary) and the Next Box is hung on the retaining hooks and secured with an additional locking screw. Alternatively, both the 2TF and the 2CM can also be installed in niches, on projections or on flat roofs without the X-bracket.
Material:
Weather-resistant SCHWEGLER wood-concrete, stainless steel X-bracket.Size:
External dimensions: W 50 x H 37 x D 42 cm
Internal dimensions: W 30 x H 35 x D 31 cm (less taper)
Internal dimensions: W 30 x H 35 x D 31 cm (less taper)
Installation:
at least 6 – 8 m installation height, on the external walls of buildings, walls, chimneys, industrial plants. A mounting surface at least 30 cm wide is required.Distance between the nesting boxes: 1 – 2 m
Colour:
Light grey. Adaptation to the house façade is possible with breathable façade paint.Includes:
Nest Box, perch, X-bracket, screws, universal wall plugs (check on site whether the supplied screws are suitable for the substrate), locking screw, installation instructions.
Fastening material: 4x key screw Din 571 6x50 galvanized, 4x universal dowel U10, 1x flat head screw M8 x 30 ISO 7380F VA, 1x bodywork screw large 8.4 x 40 galvanized
Note: check on site whether the supplied screws are suitable for the substrate!
Note: check on site whether the supplied screws are suitable for the substrate!
Weight:
approx. 21 kg| Animal species: | Bird |
|---|---|
| Bird species: | Jackdaw |
| Colour: | light grey |
| Entrance hole: | half-off |
| Mounting type: | Surface mounting |