Product not available at short notice, delivery time about 2 - 3 months!
Swift nest boxes for installation in external walls of buildings or for adding to the external surface of the wall. If wall insulation is installed this box can also be inserted into the insulating layer.
Its solid construction makes this type suitable for very exposed, sunny positions, free from any restrictions.
The maximum depth to which it can be inserted is 17 cm, and this is determined by the position of the entrance hole on the underside. The box then projects by about 3 cm.
If the box is to be installed flush with the external wall surface we recommend using the Type 16S, which is more suitable because the entrance hole is at the front. The retaining strip (Order No. 00 614/1) must also be used when attaching with screws to the wall of a building or possibly when installing in a layer of insulation.
Can be installed within an external wall to a maximum depth of 17 cm in order to prevent the
underneath entrance hole being blocked. It can also be attached to the surface of an external wall (or within a layer of rendering or external insulation) using the optional Fixing Bracket Order No. 00 614/1.
Grey. The box can be painted, if desired, using standard air-permeable external wall paint.
Cleaning and inspection:
Cleaning is easy and convenient but not essential. By turning the safety catch, the front panel is easily removed. We recommend the use of our SCHWEGLER Nest Mould (optional Item No. 00 619/6).
W 36 cm x H 17 cm x D 16 cm.
W 43 cm x H 24 cm x D 22 cm (incl. fastener).
approx. 11 kg.
Fig. 1: Built into an external wall
Fig. 2: Installed in an external wall with approx. 4 cm of insulation to prevent loss of heat through conduction
Fig. 3: Built into insulation using the optional Fixing Bracket
Fig. 4: Box installed (flush)